Актуаторы REG
Актуатор аналоговый 4 группы 2204.01REGA
REG-корпус 4 TE
ETS семейство изделий: выход
Тип продукта: аналоговый выход 4 группы
The analogue output needs 24 V AC for operation. The necessary power can be supplied by the power supply unit ref.-no.: WSSV 10.
The analogue output converts measuring data received via KNX telegrams (DPT-ID 9.0xx and 5.010) into analogue output signals.
The analogue output signals enable heating, ventilation and air conditioning units to adapt their output values to information received from the bus and thus to take part in control processes.
Voltage signals: 0 ... 1 V DC 0 ... 10 V DC
Current signals: 0 ... 20 mA DC 4 ... 20 mA DC
The analogue output offers four analog outputs which can be software-parameterised for one of the ranges mentioned above. Outputs not used can be deactivated.
The output variables can be force-controlled from a coordinating control system.
With an analogue output extension module, the number of analog outputs can be increased from 4 to 8.
In conjunction with the “dimming” function of a sensor, both, the analogue output and also the analogue output extension module can be used as an active control unit for dimming applications.
Remarks on the hardware:
The GND terminals must not be connected to the corresponding terminals of another device.
The outputs of the analogue output and of the analogue output extension module must not be connected to the 1 ... 10 V interface of electronic ballasts or electronic transformers.
All connected components must ensure safe separation from other voltages
Питание | |
напряжение питания: | AC 24 В ~ ± 10 % |
потребляемый ток: | макс. 308 мA |
Напряжение питания KNX: | DC 21 ... 32 В SELV |
Потребляемая мощность KNX: | тип. 150 мВт |
Диапазон рабочих температур: | −5 ... +45 °C |
Температура хранения/транспортировки: | −25 ... +70 °C |
Влажность | |
окруж. среды/хранения/транспортировки: | макс. 93 % относительной влажности, без конденсата |
Ширина монтажа: | 72 мм (4 TE) |
Вес: | около 180 г |
Терминалы | |
Outputs, power supply: | винтовой зажим |
одножильный провод: | 0,5 ... 4 мм2 |
многожильный без клеммника: | 0,5 ... 4 мм2 |
многожильный с клеммником: | 0,5 ... 2,5 мм2 |
KNX: | шинный разъем |
Analogue outputs | |
количество: | 4 |
Диапазоны: | 0 ... 1 B, 0 ... 10 B, DC 0 ... 20 мA, 4 ... 20 мA, DC |
Voltage signal load: | ≥ 1 кВт |
Current signal load: | ≤ 500 Вт |
Питание | |
Analogue actuator module: | DC 24 В über Systembus макс. 80 мA |